Replace Lock in UPVC Door
If you've got a upvc door lock that isn't functioning properly, you must call a professional locksmith. They are quick, efficient and will finish the job to a very high standard.
Change the barrel lock of a Upvc barrel isn't a difficult task. You just need to know what you need to do and follow the steps below.
Remove the barrel lock
uPVC windows and doors are common in many types of houses. They are ideal for letting natural light into the home and are easy to open using the right key. It takes just five minutes to replace the barrel of a lock on uPVC uPVC. It's a simple fix if you've lost your keys, a tenant has left and has not returned it, or the barrel of the lock is damaged.
double glazing window locks replace need to do is remove the screws that hold the handles. This will allow you to move the handles out of the way to allow you to access the lock barrel screw. Be careful not to loosen the screws too fast since this could damage the handles or cause them to fall off while you are working.
After the screws are removed, locate the screw that holds the lock in position on the inside of your door. This screw stands out and is a different color to the screws on the door. Using an Phillips screwdriver, remove this screw. Use the key you use to unlock the lock and place it inside the barrel. Turn it as far to the right as you can. This will let the barrel go, making it easier to open the door.
After you've loosen the screw, it's time to break the support pins that hold the euro cylinder in place. You will need a pair of strong pliers, or mole grips to do this. Grab the protruding end of the euro cylinder and bend it from side to side, and then up and down. This will break the two pins holding it in place.
Once the old cylinder is out, you can then begin the process of installing the new one. The first step is to determine the size of the lock cylinder in order to ensure that you have purchased the appropriate replacement. This can be accomplished by measuring the distance from the center of the circular portion of the keyhole, to the center of the square spindle. The measurement should be taken from the upper spindle.
Change the Cylinder
The euro cylinder is the main locking mechanism of the door made of upvc. They are simple to replace and don't need the services of a locksmith or handyman. If your lock isn't protected by this protection, you should replace it with one that has. They are very affordable and will save you money and inconvenience in the event that your locks have been compromised by these security threats.
Open the door and stand in the front of it. This allows you to reach the screw that holds the handle by hand or with an appropriate tool. Then loosen it a bit perhaps one quarter turn to begin the process.
The cylinder will now be easy to remove because the screw will not be able to hold it in place. Next, you will need to decide what size replacement cylinder you require. There are approximately 25 sizes available. It is recommended to bring your old cylinder when you buy one new to ensure it fits.
If you're unsure of the size, measure from the center of the screw hole to the end of the cylinder. You can only ensure that you're buying the right sized cylinders to fit your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
Install the new cylinder on your door in the opposite direction you removed the old one. It might be difficult to align the lock cam but it is usually an issue with alignment and will eventually be sorted out.
Now you will need to install the long screws for securing. After that, you are able to check that the cylinder is securely within the door. It is now time to reconnect the handle to the door and test it again. If all is good, the cylinder lock inside your Upvc door has been replaced and you should have added a second layer of security to your home.
Switching the Handle
There are several reasons why the handle of a door or knob for the door can become loose. It could be due to wear and tear of the handle or it could be due to the square spindle inside the handle getting worn out or loose due to excessive force or use. In this scenario the door handle will need to be replaced.
It is crucial that the door is opened so that it will not close between removing the handle and replacing it. Then, remove the screws from the interior surface of the plate using the screwdriver. This will release the handle from the plate. Don't lose the screws, because you will need to tighten them again later.
You can now remove the handles to access the cylinder lock within the door. The lock will be a circular or bulb-shaped cylinder that is only found in multi-point locks on upvc doors and some doors made of aluminum. Changing the cylinder is much the same as changing the handle except you will need to remove the old cylinder off the door and replace it with a brand new one.
It is essential to take into consideration the size of the handle replacement when choosing one. The handle should be of the same size as the original, because it must fit the existing screws holding the handle in place. You can start by consulting the size table which lists the most commonly used sizes of replacement handle plates as well as their keyhole centers.
Consider changing your handles for your upvc doors to a more secure standard like a Sold Secure SS301 set or 2* Kitemark security handles. This will increase the security of your home as well as making it a lot easier to operate the door. The price of these sets may be slightly more expensive but the extra peace of mind and security is worth it. You don't want to have to repeatedly push the door handle upwards and downwards to open or close it.
Modifying the Lock
The lock on your door made of uPVC could be a target for burglars. Upgrade your uPVC to multipoint locking to ensure its security. This would include an open hook and a deadbolt to keep out burglars. A professional locksmith can assist you with this, but it is also possible to do the work yourself. You'll require a few tools, but the procedure is easy and quick.
The first step is loosening the screws that secure the handle. You can remove the screws with a screwdriver and put them in a safe location. Then, you lift the handle up to reveal the screw that holds the cylinder in place. This screw can be unscrewed and replaced with a brand new one. You should make sure that the screw is the same size as the original. It will need to line up correctly to the barrel of the lock.
The process of changing the lock on your uPVC door can seem intimidating. It is essential to the security of your home. If you make mistakes, it may cause you to be unable to unlock the door. If you know how, it is relatively easy and costs less than contacting an expert locksmith.
To change the lock on your uPVC door, you will have to open the inner faceplate of the lock. You will need to be able to see the screw on the inside of the door and the bolt that holds it on the outside of the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
You may need to change the lock on your uPVC door for a variety of reasons. You may need to change the lock on your uPVC door for many reasons.
A change in a uPVC locking mechanism can be accomplished by anyone with basic DIY skills. You will need to inspect the hinges inside the mechanism, which could be a challenge when the lock is stuck. If the hinges are lubricated and are in good condition, it can be simple to repair. If you're not sure, it is best to seek out a professional.